LAUNCH X431 X-PROG 3 Võtmete Ja Immobilisaatori Programmeerimis seade
X-PROG 3 on professionaalne võtmete ja immobilisaatori programmeerimisseade koos tarvikute komplektiga. X-PROG 3 abil saate lugeda, kirjutada ja kloonida andmeid, programmeerimisklahve, immobilisaatorit, kiipe ning töötada mootori ja käigukasti vargusvastase süsteemiga. Seadet kasutatakse lisatarvikuna ühilduvatele Launch diagnostikaseadmetele nagu EURO PRO5, PRO7, EURO TAB II ja EURO TAB III. X-PROG 3 toetab üle 50 automargi, 460 kiipi ja kiipi ning iga tarkvarauuendusega leviala suureneb.
Funktsioonid:
- EEPROM-i lugemine/kirjutamine
- Lugemis-/kirjutusklahvid
- MCU lugemine/kirjutamine
- Mootori lugemine OBD MED17 abil
- Mootori lugemine BENCH-režiimis
- Mootori lugemine BOOT-režiimis
- Edastusandmete lugemine
- Võtmesimulaator
- Mercedes-Benzi võtmete tugi
- Mercedes-Benzi mootori ja käigukasti andmete lugemine/kirjutamine
- Eemaldage Mercedes-Benzi mootori ja käigukasti parool 3S-s
- BMW mootorite ISN-koodi lugemine
- BMW CAS4+ ja FEM kiipide lugemine/kirjutamine
- BMW E-seeria 8HP käigukasti ECU ümberprogrammeerimine nulli
- BMW mootorite Siemensi ECU kloonimine ja asendamine
- Lugege/kirjutage viienda põlvkonna Audi roolisamba kiipe
- VW neljanda põlvkonna tühjendusrežiim, kui kõik võtmed on kadunud
- Neljanda põlvkonna VW võtmeloenduse režiim, kui kõik võtmed on kadunud
- Mootori vahetamine neljanda põlvkonna VW-l (UDS)
- VW (MQB) mootori, käigukasti ja roolisamba luku vahetamine
- VW/AUDI mootori ECU asendamine või kloonimine MQB platvormil (mootori ECU andmete lugemine otse võtmest)
- MQB platvormi VW/AUDI ülekande ECU asendamine või kloonimine
- Audi viienda põlvkonna käigukasti ECU (0AW/0B5) vahetus
- Kõige kadumine/ECU ja KESSY IC asendamine neljanda põlvkonna AUDI EZS-is
- Lugege, kirjutage ja kloonige 4. põlvkonna VW mootori ECU (UDS)
- Töötab ümberprogrammeerimisseadmega programmeerimisandmete varundamiseks/taastamiseks (Boschi/Siemensi mootori ECU jaoks)
- Ja palju muid funktsioone ...
Automarkide tugi:
Alfa Romeo, Aston Martin, Audi, Bentley, BMW, Citroen, Dacia, Dodge, Ferrari, Fiat, Ford, Geely, GMC, Honda, Hyundai, Infiniti, Isuzu, Jaguar, Jeep, JMC, KIA, Lamborghini, Lancia, Land Rover , Lincoln, Mahindra, Maserati, McLaren, Mercedes Benz, Mini, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Subaru, Suzuki, Toyota, Vauxhall, Volkswagen, Volvo ja teised...
Kiibitootja tugi:
Atmel, Fujitsu, Infineon, MC68HC05, MC68HC08, MC68HC11, MC68HC12, MediaTek, MicroChip, Nordic, ST, NSC, Philips, Renesas M16, Renesas M32, Renesas M32R, Renesas R32C, Samsung SPIAS, 58C, Renesas ja teised...
EEPROM-i tootjate tugi:
4Wire, Adesto, AKM, Altera, Amic, Atmel, BOSCH, Katalüsaator, Chingis, Dallas/Maxim, EON, ESMT, EXEL, Fairchild, GI, GigaDevice, Grundig, HOLTEK, Hynix, I2C, ITT, KHIC, Macronix, MicroChip, Micron, MicroWire, Mitsubishi, Motorola, Numonyx, OKI, ON Semi, PCT, Philips, Pioneer, PMC, Ramtron, Rohm, Samsung, Seiko, Siemens, Sony, SST, ST, Toshiba, Winbond, Xicor, xUSSR, YMC, Spansion , SPI, NEC, NSC, Ford, Fujitsu ja teised...
Introduction:
X431 X-PROG 3 Vehicle Immobilizer Programmer Key programmer tool, 2021 Year newly launched X-431 G upgraded Immobilizer Programmer product . It is a powerful chip reading,matching and writing programmer.
It is suitable for professional users in the automotive electronics industry/locksmith/maintenance shop.
HIGHLIGHTS
1. It can be used with a variety of LAUNCH X-431 products, no need to bind, flexible to use, and a wide range of adaptations
2. Integrated multi-function module, one machine with multiple functions, high cost performance
3. Powerful functions, support Mercedes-Benz Infrared keys reading and writing, BMW engine ISN code reading, BENCH mode reading engine and other functions and more
4. Reading and writing data is fast and accurate
X-PROG 3 Working Car brands:
Volkswagen, Audi, Skoda, Seat, BMW, Mercedes-Benz, Toyota, and more models continue to be updated...
X-PROG 3 Working Vehicle systems:
Engine system, automatic transmission, instrument system, CAS, body system, lock system, etc.
X-PROG 3 Powerful Functions List:
EEPROM read and write
Key read and write
special key generation
on-board MCU read and write
BMW engine ISN code reading
Benz key
BMW CAS4+, FEM chip read and write
Key Simulator
Audi 5th generation steering column chip reading and writing
Volkswagen's fourth-generation meters are lost
OBD reads MED17 engine
Read engine in BENCH mode
Volkswagen fourth-generation UDS engine replacement
Boot mode read engine
Volkswagen MQB engine, gearbox, steering column lock replacement
Volkswagen four-generation free accounts are all lost
Mercedes-Benz engine gearbox wipe empty function
Transmission data reading
Working With LAUNCH Products here(could not work alone)
Apply for launch x431 : X431 V/ V+/PRO3S+/PAD V /PAD III etc.
LAUNCH X-PROG 3 can be arbitrarily matched with a variety of X -431 product use, no need to bind, flexible use, stable and reliable product.
Working ECU MCU : (over 1000kinds model,Updating.....)
Atmel NSC
Fujitsu Philips
Infineon Renesas M16
MC68HC05 Renesas M32
MC68HC08 Renesas M32R
MC68HC11 Renesas R32C
MC68HC12 Renesas R8C
MediaTek Renesas V850 SPI
MicroChip Renesas V850 UART
Nordic Samsung
ST SiLabs
Working EEPROM : (over 1000kinds model,Updating.....)
4Wire GI Numonyx SST
AdestoGigaDeviceOKI ST
AKM Grundig ONSemi Toshiba
Altera HOLTEK Other Winbond
Amic Hynix PCTXicor
Atmel I2C PhilipsxUSSR
BOSCH ITT PioneerYMC
Catalyst KHIC PMC Spansion
Chingis Macronix Ramtron SPI
Dallas/Maxim MicroChip Rohm NEC
EON Micron Samsung NSC
ESMT MicroWire Seiko Ford
EXEL Mitsubishi Siemens Fujitsu
Fairchild Motorola Sony
X-PROG3 parameter
Interface: DB26, DB15
Input voltage: DC12V
Input current: 500mA
Working temperature: 0-50℃
Storage temperature: -20-70℃
X-PROG3 Dtails&Functions:
1. Car key slot --------- Place the car key to perform the key matching function
2.DB26 --------- Connect to various anti-theft wiring harnesses, such as the data collection line for the fourth generation of instrument keys, etc.
3. Mercedes-Benz key infrared slot --------- Place the Mercedes-Benz infrared key to perform the key matching function
4. Car key chip hole --------- Place the key chip to perform key matching
5. Status indicator --------- Power indicator
6.DIY slot --------- Connect the anti-theft ECU pin through the cable to read and write data
7. Locker Install chip burning socket --------- Complete EEPROM or MCU data read and write operations
8.DC12V power supply --------- Connect DC12 power supply
9.DB15 --------- Connect the main wiring
X-PROG 3 Working Vehicle systems:
X-PROG3 Packing list:
Packing List
• Main unit
• Power adaptor
• Main diagnostic cable
• The fourth-generation data acquisition cable
• The fourth-generation of EEPROM data acquisition cable(without
dismantling dashboard)
• BENCH mode cable
• MCU converter V1
• MCU converter V2
• MCU cable with multiple leads
• EEPROM chip adaptor
• Benz infrared analog acquisition key
How to use X-PROG3 to read and write data?
Method 1: use main cable to connect car OBD2 16pin interface, and X-PROG3,with LAUNCH X431 Tablet to do key matching, data reading and writing, etc.
Method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the anti-theft matching programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host
Method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the anti-theft programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host
1500,00 €
132,17 €
2900,00 €
150,00 €